Xerox ColorQube 9303 Series Service Manual page 170

12-417-00-171, 12-418-00-171 HVF BM Flapper RAP
12-417-00-171 The booklet maker flapper did not return to the home position.
12-418-00-171 The booklet maker flapper did not move from the home position.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Check for damage or obstructions that would prevent the BM flapper from rotating.
Procedure
NOTE: All HVF BM interlocks must be made to supply +24V to the motors.
Enter dC330, code 12-271 to check the BM flapper motor, MOT12-271,
flapper rotates.
Y N
Go to WD 12.19. Check MOT12-271.
Refer to:
• GP 10 How to Check a Motor.
• 12A-171, HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• BM flapper motor, PL 12.175 Item
• BM PWB, PL 12.175 Item 10.
• BM flapper, PL 12.150 Item 23.
Enter dC330, code 12-207. Actuate the flapper home sensor, Q12-207. The
changes.
Y N
Go to WD 12.16. Check Q12-207.
Refer to:
• GP 11 How to Check a Sensor.
• 12A-171, HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Flapper home sensor, PL 12.150 Item
• BM PWB, PL 12.175 Item 10.
Perform SCP 5 Final Actions.
Status Indicator RAPs
12-417-00-171, 12-418-00-171
WARNING
Figure 1. The
1.
12.
BM
BM Flapper motor,
display
MOT12-271
February 2013
2-146
Flapper home
sensor, Q12-207
Figure 1 Component location
ColorQube® 9303 Family