Rep 3.5 Media Path Driver Pwb - Xerox ColorQube 9303 Series Service Manual

REP 3.5 Media Path Driver PWB

Parts List on PL 1.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Ensure that ESD procedures are observed during the removal and installation of the media
path driver PWB.
1. Remove the rear cover, PL 81.10 Item
2. Remove the enclosure fan, PL 1.15 Item
3. Disconnect the PJs, Figure 2.
Figure 2 Disconnect PJs
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
CAUTION
1.
6.
1
Disconnect PJs marked A.
4. Remove the media path driver PWB,
1
Remove the screws marked A then remove PWB assembly.
Figure 3 Media path driver PWB removal
Replacement
Replacement is the reverse of the removal procedure.
February 2013
4-29
Figure 3.
Repairs/Adjustments
REP 3.5