Xerox ColorQube 9303 Series Service Manual page 523

99-549-00 to 99-563-00 PEST Error 22 RAP
99-549-00 Thermistor, jet stack H1 left short.
99-550-00 Thermistor, jet stack H2 right short.
99-551-00 Thermistor, jet stack H2 left short.
99-552-00 Thermistor, jet stack H3 right short.
99-553-00 Thermistor, jet stack H3 left short.
99-554-00 Thermistor, jet stack H4 right short.
99-555-00 Thermistor, jet stack H4 left short.
99-556-00 Thermistor, head reservoir H1 open.
99-557-00 Thermistor, head reservoir H2 open.
99-558-00 Thermistor, head reservoir H3 open.
99-559-00 Thermistor, head reservoir H4 open.
99-560-00 Thermistor, head reservoir H1 short.
99-561-00 Thermistor, head reservoir H2 short.
99-562-00 Thermistor, head reservoir H3 short.
99-563-00 Thermistor, head reservoir H4 short.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Table 1 PEST codes and action
Code Hard/Soft Action
99-549 Hard Go to the 91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 1 is
securely seated. If necessary, install a new printhead.
99-550 Hard Go to the 91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 2 is
securely seated. If necessary, install a new printhead.
99-551 Hard Go to the 91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 2 is
securely seated. If necessary, install a new printhead.
ColorQube® 9303 Family
WARNING
Printhead Thermal Error RAP.
Printhead Thermal Error RAP.
Printhead Thermal Error RAP.
Code Hard/Soft Action
99-552 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 3 is
securely seated. If necessary, install a new printhead.
99-553 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 3 is
securely seated. If necessary, install a new printhead.
99-554 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 4 is
securely seated. If necessary, install a new printhead.
99-555 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 4 is
securely seated. If necessary, install a new printhead.
99-556 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 1 is
securely seated. If necessary, install a new printhead.
99-557 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 2 is
securely seated. If necessary, install a new printhead.
99-558 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 3 is
securely seated. If necessary, install a new printhead.
99-559 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 4 is
securely seated. If necessary, install a new printhead.
99-560 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 1 is
securely seated. If necessary, install a new printhead.
99-561 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 2 is
securely seated. If necessary, install a new printhead.
99-562 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 3 is
securely seated. If necessary, install a new printhead.
99-563 Hard Go to the
to 91-803-00, 91-856-00 to 91-859-00
Make sure the small ribbon cable on the right side of the printhead 4 is
securely seated. If necessary, install a new printhead.
February 2013
2-499
Table 1 PEST codes and action
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
91-523-00 to 91-558-00, 91-664-00 to 91-667-00, 91-800-00
Printhead Thermal Error RAP.
99-549-00 to 99-563-00
Status Indicator RAPs