Rep 81.4 Tray 1 And Tray 2 Feed Rolls - Xerox ColorQube 9303 Series Service Manual

5. Remove the bypass module, Figure
Figure 4 Bypass module
Replacement
Replacement is the reverse of the removal procedure.
ColorQube® 9303 Family
4.
2
Unhook the module
from the door then
remove the module.
1
Lift the bottom of the
assembly away from
the door.

REP 81.4 Tray 1 and Tray 2 Feed Rolls

Parts List on PL 81.25,
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove tray 1 or tray 2 as required,
2. Un-clip and release the guide,
February 2013
4-291
PL 81.26
WARNING
GP 14. Disconnect the power cord
WARNING
REP 71.1.
Figure 1.
Press the clip to release the guide
Figure 1 Release guide
REP 81.3, REP 81.4
Repairs/Adjustments