Rep 10.4 Front Transfix Motor; Rep 10.5 Rear Transfix Motor - Xerox ColorQube 9303 Series Service Manual

REP 10.4 Front Transfix Motor

Parts List on PL 10.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the exit paper path, REP 10.20.
2. Remove the front transfix motor, Figure
2
Remove screws
1
marked A, then remove
Disconnect 2 harnesses.
the motor.
Figure 1 Front transfix motor removal
Replacement
1. Replacement is the reverse of the removal procedure.
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
WARNING
1.

REP 10.5 Rear Transfix Motor

Parts List on PL 10.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the rear cover, PL 81.10 Item
2. Remove the rear transfix motor,
1
Disconnect 2 harnesses.
Figure 1 Rear transfix motor removal
Replacement
1. Replacement is the reverse of the removal procedure.
February 2013
4-67
WARNING
GP 14. Disconnect the power cord
WARNING
1.
Figure 1.
2
Remove screws
marked A then remove
the motor.
REP 10.4, REP 10.5
Repairs/Adjustments