Rep 75.3 Tray 5 Down Sensor - Xerox ColorQube 9303 Series Service Manual

Figure 2 Remove the sensor
Replacement
1. The replacement is the reverse of the removal procedure.
2. Check that the harness routing is correct,
ColorQube® 9303 Family
Press the tabs to release the sensor
Figure 1.

REP 75.3 Tray 5 Down Sensor

Parts List on PL 75.68
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present can cause injury.
1. Remove the rear cover, REP
2. Remove the tray 5 down sensor,
Replacement
The replacement is the reverse of the removal procedure.
February 2013
4-273
WARNING
GP 14. Disconnect the power cord
WARNING
75.8.
Figure 1.
2 1
Remove sensor from Disconnect the
bracket
harness
Figure 1 Remove the sensor
REP 75.2, REP 75.3
Repairs/Adjustments