Xerox ColorQube 9303 Series Service Manual page 951

REP 12.54-171 Pusher Upper and Lower Sensors
Parts List on PL 12.115.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the top cover REP 12.1-171.
2. Remove the upper and lower sensor assembly,
Figure 1 Pusher Sensor Assembly
Replacement
Reverse the removal procedures to replace the Pusher sensor assembly.
ColorQube® 9303 Family
WARNING
WARNING
GP 14. Disconnect the power cord
Figure 1.
1
Remove the screw.
2
Disconnect the two PJs.
REP 12.55-171 HVF PSU Assembly
Parts List on PL 12.140.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the front and rear covers
2. Remove the PSU module,
Replacement
Reverse the removal procedures to replace the HVF PSU module.
February 2013
4-193
WARNING
WARNING
GP 14. Disconnect the power cord
REP 12.1-171.
Figure 1.
1
Remove the 5 screws.
2
Disconnect the grounding
strap and the two PJs.
Figure 1 HVF PSU
REP 12.54-171, REP 12.55-171
Repairs/Adjustments