Xerox ColorQube 9303 Series Service Manual page 980

REP 12.76-171 Bin 1 Upper Level Sensor
Parts List on PL 12.110.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the HVF front and rear covers,
2. Disconnect the PJs and remove the receiver or transmitter as necessary,
Front transmitter
Figure 1 Bin 1 Upper level sensor
Replacement
Reverse the removal procedures to replace the transmitter or receiver of the bin 1 upper level
sensor.
Repairs/Adjustments
REP 12.76-171, REP 12.77-171
WARNING
WARNING
GP 14. Disconnect the power cord
REP 12.1-171.
Figure
Rear receiver
REP 12.77-171 Tri Folder Door Interlock Switches and
Sensor
Parts List on PL 12.215.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
1. Remove the tri folder front and top covers,
2. Remove the front door and top cover interlock switches and the top cover sensor,
1.
Top cover interlock switch
Front door interlock switch
Figure 1 TF Interlock Switches and Cover Sensor
Replacement
Reverse the removal procedures to replace the front door and top cover interlock switches and
the top access cover sensor.
February 2013
4-222
WARNING
WARNING
GP 14. Disconnect the power cord
REP 12.67-171.
Top cover sensor
ColorQube® 9303 Family
Figure