Xerox ColorQube 9303 Series Service Manual page 318

22-721-00 No Response From The Service Registry RAP
22-721-00 Triple A gets no response from the service registry service.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Switch off the machine, then switch on the machine,
Status Indicator RAPs
22-721-00, 22-750-04 to 22-755-17
WARNING
GP 14.
22-750-04 to 22-755-17 Configuration Mismatch RAP
22-750-04 Output device configuration mismatch.
22-750-17 When the system detects that the accessory card configuration mismatch has
changed during the power on sequence.
22-751-04 Paper tray configuration mismatch.
22-754-17 When the system detects the UI configuration has changed during the power on
sequence.
22-755-17 After the 2nd user confirmation of configuration mismatch if the system detects that
the RDT configuration has changed during the power on sequence.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Switch off the machine, then switch on the machine,
February 2013
2-294
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 14.
ColorQube® 9303 Family