Xerox ColorQube 9303 Series Service Manual page 412

91-669-00 Excessive Skew RAP
91-669-00 The scanned image has too much skew to process.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
• Check the CVT glass for contamination, if necessary clean the glass. Refer to
Optics Cleaning Procedure.
• Check the DADH operation.
• Check the media path for debris or wear.
• Check the media and the media settings.
Procedure
Remove the documents from the DADH. Perform
ment Glass Registration.
Check the document guides on the DADH. Make sure that they are correctly adjusted to the
document size. Re-scan the test patterns. The fault remains.
Y N
Perform dC972 Print Head Uniformity.
Go to IQ 10 Margin, Mis-registration or Skew RAP.
Status Indicator RAPs
91-669-00, 91-670-00
WARNING
dC608 DADH Registration and
91-670-00 Scanned Image Out of Sequence RAP
91-670-00 The expected image did not match the scanned image.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
ADJ 62.1 Load the test patterns correctly in the DADH, refer to
illustrations in Option 3 Manual and Option 4 Manual.
dC609 Docu-
February 2013
2-388
WARNING
GP 14. Disconnect the power cord. Electricity can cause
dC972 Print Head Uniformity. Refer to the
ColorQube® 9303 Family