Xerox ColorQube 9303 Series Service Manual page 777

4. Install the power supply unit, Figure
1
Fit the lugs on the rear of the power supply unit over the support brackets
3
Install the 4 fixing screws to
secure the power supply
Figure 6 Install the power supply unit
5. Re-connect the connectors to the power supply unit and the ribbon cable to the drum
driver PWB, Figure 1.
ColorQube® 9303 Family
6.
2
Rest the power supply
on the supports
February 2013
4-19
Repairs/Adjustments
REP 1.9