Xerox ColorQube 9303 Series Service Manual page 954

REP 12.58-171 Not Used
Repairs/Adjustments
REP 12.58-171, REP 12.59-171
REP 12.59-171 Crease Roll Gate Assembly
Parts List on PL 12.180.
Purpose
This procedure is used to repair the following components:
• Crease roll gate rack gear,
• Crease roll gate rack drive gear,
• Crease roll gate rack, PL 12.180 Item
• Crease roll gate front guide,
• Crease roll gate rear guide,
• Crease roll gate, PL 12.180 Item
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Open the HVF BM front door and fully pull out the BM.
2. Remove the crease blade knob (6d),
3. Remove the crease roll handle (6c),
4. Remove the BM front cover,
5. Remove the BM right hand cover,
6. Remove the crease roll assembly,
7. Remove the crease roll gate motor,
February 2013
4-196
PL 12.180 Item 8.
PL 12.180 Item 13.
14.
PL 12.180 Item 15.
PL 12.180 Item 16.
19.
WARNING
WARNING
GP 14. Disconnect the power cord from the cus-
PL 12.150 Item 4.
PL 12.150 Item 5.
PL 12.150 Item 3.
REP 12.56-171.
REP 12.52-171.
REP 12.24-171.
ColorQube® 9303 Family