Xerox ColorQube 9303 Series Service Manual page 162

A
Install new components as necessary:
• Transport motor 1, PL 12.120 Item
• HVF PWB, PL 12.140 Item 2.
Check the transport motor 1 drive belt, PL 12.120 Item
Y N
Install a new transport motor 1 drive belt,
Enter dC330, code 12-245 punch unit motor, to check that the motor runs. The motor runs.
Y N
Go to WD 12.24. Check the wiring and repair as necessary,
Refer to:
• GP 10 How to Check a Motor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Hole punch module, PL 12.125 Item
• HVF PWB, PL 12.140 Item 2.
Perform SCP 5 Final Actions.
Status Indicator RAPs
12-367-00-171, 12-368-00-171, 12-380-00-171
2.
7. The drive belt is good.
PL 12.120 Item 7.
REP 1.1. Check MOT12-245.
19.
Punch sensor
1 (Q12-078)
Punch sensor
2 (Q12-075)
Punch sensor
3 (Q12-076)
February 2013
2-138
Transport motor 1
(MOT12-223)
REAR VIEW
Figure 1 Component location
ColorQube® 9303 Family
Transport motor 1
drive belt