Table of Contents
Advertisement
99-000-00 to 99-067-00 PEST Error 1 RAP
99-000-00 PEST test started.
99-052-00 Board link, MUD link broken.
99-053-00 Board link, PS link broken.
99-055-00 Cable video, printhead 1.
99-056-00 Cable video, printhead 2.
99-057-00 Cable video, printhead 3.
99-058-00 Cable video, printhead 4.
99-059-00 Cable video, printhead 1.
99-060-00 Cable video, printhead 2.
99-061-00 Cable video, printhead 3.
99-062-00 Cable video, printhead 4.
99-066-00 Board link, 3TM link broken.
99-067-00 Board link, PFP ink broken.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Refer to
Table
1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Table 1 PEST Hard and Soft Fault Codes
Code
Hard/Soft
Action
99-000
Soft
For information only. Indicates the start of the PEST procedure.
99-052
Hard
Refer to
WD 9.7
unit driver PWB and the IME controller PWB. If the wiring harness is
good, then install new marking unit driver PWB,
IME controller PWB,
99-053
Hard
Go to the
92-520-00
99-055
Hard
Go to the
91A
Printhead Communications RAP. Check pins 7 to 11 on
the video cable from the IME controller PWB,
printhead 1 PWB,
99-056
Hard
Go to the
91A
Printhead Communications RAP. Check pins 7 to 11 on
the video cable from the IME controller PWB to the printhead 2 PWB.
ColorQube® 9303 Family
WARNING
and
WD
9.10. Check the wiring between the marking
PL 92.10 Item 4
PL 92.10 Item
1.
RAP. Check for loose or damaged connections.
PL 92.10 Item 1
PL 91.25 Item
2.
Table 1 PEST Hard and Soft Fault Codes
Code
Hard/Soft
Action
99-057
Hard
Go to the
the video cable from the IME controller PWB to the printhead 3 PWB.
99-058
Hard
Go to the
the video cable from the IME controller to the printhead 4 PWB.
99-059
Hard
Go to the
on the video cable from the IME controller PWB to the printhead 1
PWB.
99-060
Hard
Go to the
on the video cable from the IME controller to the printhead 2 PWB.
99-061
Hard
Go to the
on the video cable from the IME controller PWB to the printhead 3
PWB.
99-062
Hard
Go to the
on the video cable from the IME controller to the printhead 4 PWB.
99-066
Hard
Go to the
age.
99-067
Hard
Go to the
or
to the
February 2013
2-477
91A
Printhead Communications RAP. Check pins 7 to 11 on
91A
Printhead Communications RAP. Check pins 7 to 11 on
91A
Printhead Communications RAP. Check pins 14 to 27
91A
Printhead Communications RAP. Check pins 14 to 27
91A
Printhead Communications RAP. Check pins 14 to 27
91A
Printhead Communications RAP. Check pins 14 to 27
92-530-00
RAP. Check the 3 tray module harness for dam-
92-535-00, 92-536-00
RAP. Check for loose connections.
Status Indicator RAPs
99-000-00 to 99-067-00
Advertisement
Chapters
Table of Contents
