Rep 91.3 Head Maintenance Wiper - Xerox ColorQube 9303 Series Service Manual

1
Example of the head maintenance wiper not level.
2
Correctly seated and level head maintenance wiper.
Figure 4 Level head maintenance wiper
3. Ensure that both carriages are parked and the wiper is in the home position, all the way
up or down.
Repairs/Adjustments
REP 91.2, REP 91.3

REP 91.3 Head Maintenance Wiper

Parts List on PL 91.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Do not touch the exposed face of the printheads. Surface contamination or minor damage can
destroy the printhead.
Do not touch the wiper pads.
1. Slide out the marking unit to the maintenance position, Refer to
2. Move the head maintenance wiper shaft down to and out of the removal slots,
2
Wiper drive shafts.
3
Removal slot.
Figure 1 Move the HM wiper shafts
February 2013
4-322
WARNING
GP 14. Disconnect the power cord
WARNING
CAUTION
CAUTION
GP 6.
1
Turn the upper drive shaft to lower
the wiper drive shafts.
3
Removal slot.
ColorQube® 9303 Family
Figure 1.