Xerox ColorQube 9303 Series Service Manual page 235

16-606-105 OS Problem RAP
16-606-105 OS problem
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. If a single occurrence, switch off the machine, then switch on the machine,
2. For multiple occurrences, reinstall software,
ColorQube® 9303 Family
WARNING
GP 4.
16-607-19 to 16-608-14 Invalid RPC Data / Unable to Free
Resources RAP
16-607-19 Invalid RPC data received
16-607-46 Invalid RPC data received
16-607-47 Invalid RPC disk diagnostic data received
16-607-92 Invalid RPC data received
GP 14.
16-607-105 Service run loop failed
16-608-09 Unable to free IPC resources
16-608-11 IPC unregister failed
16-608-14 Unable to free IPC resources
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
1. If a single occurrence, take no action.
2. For multiple occurrences, switch off the machine, then switch on the machine,
3. If the fault remains, reinstall software,
February 2013
2-211
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 4.
Status Indicator RAPs
16-606-105, 16-607-19 to 16-608-14
GP 14.