Table of Contents
Advertisement
99-293-00 to 99-312-00 PEST Error 9 RAP
99-293-00 Fuse MUD 50V open.
99-301-00 Connector, marking unit driver PWB.
99-302-00 Connector, marking unit driver PWB.
99-303-00 Connector, marking unit driver PWB.
99-304-00 Connector, marking unit driver PWB.
99-305-00 Connector, marking unit driver PWB.
99-306-00 Connector, marking unit driver PWB.
99-307-00 Connector, marking unit driver PWB.
99-308-00 Connector, marking unit driver PWB.
99-309-00 Connector, marking unit driver PWB.
99-310-00 Connector, MU solenoid patch PWB.
99-311-00 Connector, MU solenoid patch PWB.
99-312-00 Connector, MU solenoid patch PWB.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to
Table
1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Table 1 PEST Hard and Soft Fault Codes
Code
Hard/Soft Action
99-293
Hard
Go to the
01D
RAP.
99-301
Hard
Check PJ303 on the marking unit driver PWB and its wiring. Refer to
WD
9.10.
99-302
Hard
Check PJ102 on the marking unit driver PWB and its wiring. Refer to
WD
9.9.
99-303
Hard
Check that PJ304 on the marking unit driver PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
WD
Status Indicator RAPs
99-293-00 to 99-312-00
WARNING
9.11.
Table 1 PEST Hard and Soft Fault Codes
Code
Hard/Soft Action
99-304
Hard
Check that PJ801 on the marking unit driver PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
99-305
Hard
Check that PJ101 on the marking unit driver PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
99-306
Hard
Check that PJ901 on the marking unit heater PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
99-307
Hard
Check that PJ701 on the marking unit heater PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
99-308
Hard
Check that PJ401 on the marking unit heater PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
99-309
Hard
Check that PJ201 on the marking unit heater PWB is securely con-
nected. Check the wiring for an open circuit, repair as necessary,
1.1. Refer to
99-310
Hard
Check that PJ430 on the solenoid patch PWB is securely connected.
Check the wiring for an open circuit, repair as necessary,
Refer to
99-311
Hard
Check that PJ110 on the solenoid patch PWB is securely connected.
Check the wiring for an open circuit, repair as necessary,
Refer to
99-312
Hard
Check that PJ410 on the solenoid patch PWB is securely connected.
Check the wiring for an open circuit, repair as necessary,
Refer to
REP
February 2013
2-484
WD
9.12.
WD 9.9
and
WD
9.16.
WD 9.8
and
WD
9.12.
WD
9.8.
WD
9.8.
WD
9.8.
WD
9.14.
WD
9.14.
WD
9.15.
ColorQube® 9303 Family
REP
REP
REP
REP
REP
REP
REP
1.1.
REP
1.1.
REP
1.1.
Advertisement
Chapters
Table of Contents
