Rep 62.6 Carriage Motor And Mounting - Xerox ColorQube 9303 Series Service Manual

REP 62.6 Carriage Motor and Mounting

Parts List on PL 62.16
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the scanner top cover, REP
2. Remove the carriage motor cover, (2 screws).
3. Figure 1. Prepare to remove the carriage motor.
1
Remove 3
screws.
Figure 1 Preparation
4. Remove the scanner harness bracket,
5. Figure 2. Remove the carriage motor and mounting. Note the orientation of the bracket
and the mounting.
Repairs/Adjustments
REP 62.6
WARNING
GP 14. Disconnect the power cord
62.2.
PL 62.16 Item 14, to allow access to PJ 929.
1
Release the wiring and
disconnect PJ 929.
(Press the top of the PJ)
Replacement
1. The replacement procedure is the reverse of the removal procedure.
2. Perform ADJ 62.3 Carriage Motor and Scanner Drive Belt.
February 2013
4-250
2
Remove the bracket
(2 screws).
Figure 2 Motor and mounting
ColorQube® 9303 Family
3
Remove the
mounting (2
screws).