Xerox ColorQube 9303 Series Service Manual page 922

5. Figure 1, remove the idler roller.
3
Push the other bearing
though the frame to
remove the idler roller.
2
Push out the shaft and
remove one bearing.
Figure 1 Idler roller removal
Repairs/Adjustments
REP 12.29-171
1
Remove the E-clip.
6. Figure 2, remove the BM conveyor belt.
Replacement
Reverse the removal procedure to replace the BM conveyor belts.
February 2013
4-164
1
Release the belt from the drive
pulley.
2
Feed the belt through
the cut-out to remove.
Figure 2 Belt removal
ColorQube® 9303 Family