Table of Contents
Advertisement
REP 1.7 Molex Mini-Fit Junior Connectors
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Take care during this procedure. Sharp edges may be present that can cause injury.
Repairs/Adjustments
REP 1.7
WARNING
GP
14. Disconnect the power cord
WARNING
1.
Figure
2. Remove the terminal from the housing, using the Molex, Mini-Fit extractor tool.
2
Withdraw the terminal
from the connector body
2.
Cut off the damaged terminal, then strip 4 mm of insulation from the end of the wire.
Replacement
1.
Select the correct terminal type.
February 2013
4-14
1
Insert the prongs fully down
the sides of the terminal
Figure 2 Removing the terminal
ColorQube® 9303 Family
Advertisement
Chapters
Table of Contents
