Xerox ColorQube 9303 Series Service Manual page 525

99-606-00 to 99-610-00 PEST Error 25 RAP
99-606-00 Solenoid, ink dose valve H1 magenta open.
99-607-00 Solenoid, ink dose valve H1 black open.
99-608-00 Solenoid, ink dose valve H2 cyan yellow open.
99-609-00 Solenoid, ink dose valve H2 cyan open.
99-610-00 Solenoid, ink dose valve H2 magenta open.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Table 1 PEST codes and action
Code Hard/Soft Action
99-606 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-607 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-608 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-609 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
99-610 Hard Go to the 93A Ink Melt Reservoir Check RAP. Check the DC cabling to
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
ColorQube® 9303 Family
WARNING
99-611-00 to 99-625-00 PEST Error 26 RAP
99-611-00 Solenoid, ink dose valve H2 black open.
99-612-00 Solenoid, ink dose valve H3 yellow open.
99-613-00 Solenoid, ink dose valve H3 cyan open.
99-614-00 Solenoid, ink dose valve H3 magenta open.
99-615-00 Solenoid, ink dose valve H3 black open.
99-616-00 Solenoid, ink dose valve H4 yellow open.
99-617-00 Solenoid, ink dose valve H4 cyan open.
99-618-00 Solenoid, ink dose valve H4 magenta open.
99-619-00 Solenoid, ink dose valve H4 black open.
99-620-00 Solenoid, ink purge valve H1 short.
99-621-00 Solenoid, ink purge valve H2 short.
99-622-00 Solenoid, ink purge valve H3 short.
99-623-00 Solenoid, ink purge valve H4 short.
99-624-00 Solenoid, ink dose valve H1 cyan short.
99-625-00 Solenoid, ink dose valve H1 magenta short.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Procedure
Refer to Table 1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Code Hard/Soft Action
99-611 Hard Go to the
the reservoir. If it is open or short, install a new cable. If necessary,
install a new ink reservoir.
February 2013
99-606-00 to 99-610-00, 99-611-00 to 99-625-00
2-501
WARNING
GP 14. Disconnect the power cord. Electricity can cause
Table 1 PEST codes and action
93A Ink Melt Reservoir Check RAP. Check the DC cabling to
Status Indicator RAPs