Rep 2.2 User Interface Touch Screen - Xerox ColorQube 9303 Series Service Manual

REP 2.2 User Interface Touch Screen

Parts List on PL 2.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Ensure that ESD procedures are observed during the removal and installation of the user inter-
face touch screen.
1. Detach the user interface control panel,
2. Place the user interface control panel on a flat surface.
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
CAUTION
REP 2.1.
3. Remove the user interface touch screen,
1
Remove 3 harness
2
clips
Disconnect the
harnesses
Figure 2 Remove the user interface touch screen
Replacement
1. The replacement is the reverse of the removal procedure.
2. If a problem occurs with the display. Refer to
check out the functions of the UI.
February 2013
4-23
Figure 2.
4
Remove the
retainer
3
Remove 3 screws
GP 32 User Interface Panel Diagnostics and
Repairs/Adjustments
REP 2.2