Rep 1.4 Amp Ei Connectors - Xerox ColorQube 9303 Series Service Manual

REP 1.4 AMP EI Connectors

Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
NOTE: The male housings contain socket terminals, and the female housings contain pin ter-
minals.
1. Use the extractor tool, to release the terminal from the housing. Refer to
tify the male housing and terminal type. Refer to
and the terminal type.
1
Depress the prong with a small
flat head screw driver to release
the terminal
Figure 1 Terminal removal; male housing.
Repairs/Adjustments
REP 1.4
WARNING
GP 14. Disconnect the power cord
Figure 1
Figure 2 to identify the female housing
2
Remove the terminal
from the housing
to iden-
1
Insert a paper clip to
release the prong
Figure 2 Terminal removal; female housing.
2. Cut off the damaged terminal, then strip 3 mm of insulation from the end of the wire.
February 2013
4-10
2
Remove the terminal from the
housing
ColorQube® 9303 Family