Rep 5.16 Document Width Sensor - Xerox ColorQube 9303 Series Service Manual

Replacement
1. The replacement is the reverse of the removal procedure. Make sure the white washer is
installed correctly, Figure 4.
2. Perform the DADH CVT motor adjustment, refer to
Figure 4 Replacement
Repairs/Adjustments
REP 5.15, REP 5.16
ADJ 5.1.
CVT roll.
White washer.
February 2013
4-54

REP 5.16 Document Width Sensor

Parts List on PL 5.35
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the feed assembly, REP 5.3.
2. Remove the input tray assembly, REP
Disconnect the ground harness from the static eliminator before the input tray assembly lower
cover is removed, refer to Figure 1.
3. Turn the input tray assembly upside down, then remove the Lower cover right,
Item 9 and Lower cover left, PL 5.35 Item 20
WARNING
GP 14. Disconnect the power cord
5.4.
CAUTION
ColorQube® 9303 Family
PL 5.35