Xerox ColorQube 9303 Series Service Manual page 823

9. Remove the rear outer frame, Figure
1
Remove 1
screw to
remove the
lever mount
2
Remove 6 screws marked A
Figure 5 Rear outer frame removal
ColorQube® 9303 Family
5.
5
Disconnect the
harnesses from
both sides of
the mount
4
Remove the
rear outer
frame from the
machine. Take
care not to drop
the gear
3
Remove 3 screws
marked B
10. Prepare to remove the rear transfix linkage and gear,
1
Support the weight of the rear
transfix linkage and gear.
February 2013
4-65
Figure 6.
2
Push the bearing out.
Figure 6 Preparation
Repairs/Adjustments
REP 10.3