Xerox ColorQube 9303 Series Service Manual page 473

93-901-00 to 93-904-00 Ink Melt Reservoir Fill Failure RAP
93-901-00 Black melt reservoir over fill failure
93-902-00 Magenta melt reservoir over fill failure
93-903-00 Cyan melt reservoir over fill failure
93-904-00 Yellow melt reservoir over fill failure
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Do not touch the ink loader melt plates while the machine is switched on. Dangerous
voltages may be present that could cause death or injury.
Ensure that the melt plates on the ink loader are operating correctly. Check the last 40 faults for
the following codes:
• 93-523 to 534
The last 40 faults is clear of ink melt plate faults
Y N
Perform the relevant RAP:
• 93-523-00 to 93-526-00, 93-527-00 to 93-530-00, 93-532-00, 93-533-00, 93-957-00
Ink Melt Error RAP
• 93-525-00, 93-528-00, 93-531-00, 93-534-00
Perform dC612 Print Test Pattern. Run 100 solid fills of the affected colour. Check the ink
melt reservoir for overfill. The ink reservoir is good.
Y N
Go back to the beginning of this RAP.
Perform SCP 5 Final Actions
Go to WD 9.9 and WD 9.16. Check the wiring between the ink level sensors, the solenoid
patch PWB and the marking unit driver PWB. Refer to:
• P/J101, Marking unit driver PWB
• P/J380, P/J760, P/J780 Solenoid patch PWB.
• 01B +3.3V ESTAR Distribution RAP.
• 01L 0V Distribution RAP
The wiring is good.
Y N
Repair the wiring REP 1.1.
Install new components as necessary.
• Ink reservoir, PL 93.10 Item 10.
• Marking unit driver PWB, PL 92.10 Item
ColorQube® 9303 Family
WARNING
WARNING
Ink Melt Thermistor Error RAP
4.
93-909-00 to 93-924-00 Printhead Reservoir Level Failure
RAP
93-909-00 Head 1 black reservoir level sense failure
93-910-00 Head 1 magenta reservoir level sense failure
93-911-00 Head 1 cyan reservoir level sense failure
93-912-00 Head 1 yellow reservoir level sense failure
93-913-00 Head 2 black reservoir level sense failure
93-914-00 Head 2 magenta reservoir level sense failure
93-915-00 Head 2 cyan reservoir level sense failure
93-916-00 Head 2 yellow reservoir level sense failure
93-917-00 Head 3 black reservoir level sense failure
93-918-00 Head 3 magenta reservoir level sense failure
93-919-00 Head 3 cyan reservoir level sense failure
93-920-00 Head 3 yellow reservoir level sense failure
93-921-00 Head 4 black reservoir level sense failure
93-922-00 Head 4 magenta reservoir level sense failure
93-923-00 Head 4 cyan reservoir level sense failure
93-924-00 Head 4 yellow reservoir level sense failure
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Clear the fault code by:
• Switch the machine off and then switch the machine on,
February 2013
93-901-00 to 93-904-00, 93-909-00 to 93-924-00
2-449
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 14.
Status Indicator RAPs