Xerox ColorQube 9303 Series Service Manual page 442

92-542-00 PS Interrupt Storm Fault RAP
92-542-00 PS interrupt storm.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
• Switch off the machine, then switch on the machine,
Procedure
Perform the following:
1. Install a new power supply unit, PL 1.15 Item
2. If the fault persists, install a new IME controller PWB,
Status Indicator RAPs
92-542-00, 92-543-00, 92-544-00
WARNING
GP 14.
2.
PL 92.10 Item 1.
92-543-00, 92-544-00 MU Interrupt Storm Faults RAP
92-543-00 MU interrupt storm.
92-544-00 MUID interrupt storm.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
• Switch off the machine, then switch on the machine,
Procedure
Install a new marking unit driver PWB,
February 2013
2-418
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 14.
PL 92.10 Item 4.
ColorQube® 9303 Family