Rep 10.22 Upper Baffle - Xerox ColorQube 9303 Series Service Manual

REP 10.22 Upper Baffle

Parts List on PL 10.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Do not clean the stripper blade. The stripper blade is very sharp and can cause injury. If
the stripper blade is dirty a new blade must be installed.
Take care during this procedure. The stripper blade is very sharp and can cause injury.
Use care when working near the drum. The drum can be damaged easily, which will cause
print quality defects.
1. Open the front door.
2. Remove the inner cover, PL 81.11 Item
3. Remove the exit paper path, REP 10.20.
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
WARNING
WARNING
CAUTION
2.
4. Prepare to remove the upper baffle,
1
Disconnect 3 sensors and LED PWB.
5. Unlock and fully open the stripper gate,
February 2013
4-95
Figure 1.
Figure 1 Preparation
GP 31.
Repairs/Adjustments
REP 10.22