Xerox ColorQube 9303 Series Service Manual page 1094

3. Release the service loop from the draw slide and cable clamps,
Figure 1 Release Service loop
4. Disconnect the following harnesses:
• PJ 408, media path PWB.
• PJ 603, drum driver PWB.
5. Remove the PSU, PL 1.15 Item 2.
Repairs/Adjustments
REP 91.11
Figure 1. 6.
Replacement
1.
1
2.
Remove the screws.
February 2013
4-336
Remove the service loop, Figure 2.
1
Release cables from the cable clips.
Figure 2 Service loop removal
Replacement is the reverse of the removal procedure.
Push the marking unit slides into the machine with the marking unit removed.
2
Disconnect the in-line connector.
ColorQube® 9303 Family