Table of Contents
Advertisement
TP 2 to TP 10 Solid Fill Test Pages
Solid fills are used to purge the jets of contamination or to correct cross-colour contaminated
jets. Solid fills are also used to examine media damage, cleaning unit function, skew, and mar-
gins.
Solid fill test pages are printed from dC612. TP5 black solid fill can also be printed from dC959.
NOTE: All test prints should be printed on A4 or 8.5 x 11 inch plain paper and long edge feed.
Use the best quality media available. Do not use hole punched paper.
NOTE: When printing TP 5 from dC959, ensure that the paper is loaded LEF into tray 4.
Purpose
Figure
1. These single-sided prints provide solid-fills in all eight colours:.
•
Select TP 2 to print two cyan solid fills
•
Select TP 3 to print two magenta solid fills
•
Select TP 4 to print two yellow solid fills
•
Select TP 5 to print two black solid fills
•
Select TP 6 to print two red solid fills
•
Select TP 7 to print two green solid fills
•
Select TP 8 to print two blue solid fills
•
Select TP 9 to print two white solid fills
•
Select TP 10 to print a single set of all eight solid fills (cyan, magenta, yellow, black, red,
green, blue and white).
To solve image quality problems associated with solid fills, refer to
Image Quality
TP 2 to TP 10
IQ
5,
IQ
9,
IQ 10
and
IQ
24.
TP 6 Red solid fill
TP 7 Green solid fill
TP 8 Blue solid fill
TP 9 White solid fill
February 2013
3-84
TP 2 Cyan solid fill
TP 3 Magenta solid fill
TP 4 Yellow solid fill
Figure 1 Solid fill pages
ColorQube® 9303 Family
TP 5 Black
solid fill
Advertisement
Chapters
Table of Contents
