Rep 10.16 Exit Sensor (15) - Xerox ColorQube 9303 Series Service Manual

Replacement
1. Replacement is the reverse of the removal procedure.
2. Ensure that the lugs on the sensor are located correctly in the sensor holder,
1
Check the lugs secures the sensor in position
Figure 3 Sensor location
Repairs/Adjustments
REP 10.15, REP 10.16

REP 10.16 Exit Sensor (15)

Parts List on PL 10.15
Figure 3.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the exit paper path,
February 2013
4-84
WARNING
GP 14. Disconnect the power cord
WARNING
REP 10.20.
ColorQube® 9303 Family