Xerox ColorQube 9303 Series Service Manual page 131

12-024-00-171, 12-025-00-171 HVF Paddle Roller Position
RAP
12-024-00-171 The paddle roller has failed to return to the home position.
12-025-00-171 The paddle roller has failed to move from the home position.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Check for damage or any obstruction that would prevent paddle movement. If necessary,
install new components.
Procedure
Enter dC330, code 12-238 paddle roll motor run, to check the movement of the paddle,
1. The paddle turns.
Y N
Go to WD 12.10. Check the wiring and repair as necessary,
roller motor, MOT12-238. Refer to:
• GP 10 How to Check a Motor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Paddle unit, PL 12.115 Item 2.
• HVF PWB, PL 12.140 Item 2.
Stack the code 12-186 paddle roll home sensor, Q12-186. The display changes as the pad-
dle rotates.
Y N
Go to WD 12.9. Check the wiring and repair as necessary,
roller home sensor, Q12-186. Refer to:
• GP 11 How to Check a Sensor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Paddle unit, PL 12.115 Item 2.
• HVF PWB, PL 12.140 Item 2.
Perform SCP 5 Final Actions.
ColorQube® 9303 Family
WARNING
REP 1.1. Check the paddle
REP 1.1. Check the paddle
Paddle roll
home sen-
sor
Q12-186
Figure
February 2013
2-107
Paddle roll
motor
MOT12-238
Figure 1 Components
Status Indicator RAPs
12-024-00-171, 12-025-00-171
Pusher