Xerox ColorQube 9303 Series Service Manual page 222

16-155-19 ESS Failed to Boot from Alternate Disk RAP
16-155-19 ESS failed to boot from alternate disk partition
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. If a single occurrence, take no action.
2. For multiple occurrences, reinstall software,
Status Indicator RAPs
16-155-19, 16-156-19
WARNING
GP 4.
16-156-19 Service Run Loop Failed RAP
16-156-19 Service run loop failed
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
1. If a single occurrence, switch off the machine, then switch on the machine,
2. For multiple occurrences, reinstall software,
February 2013
2-198
WARNING
GP 14. Disconnect the power cord. Electricity can cause
GP 4.
ColorQube® 9303 Family
GP 14.