Rep 5.14 Feed Roll Assembly - Xerox ColorQube 9303 Series Service Manual

REP 5.14 Feed Roll Assembly

Parts List on PL 5.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Open the DADH top cover.
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
2. Remove the DADH feed roll assembly,
February 2013
4-51
Figure 1.
1
Completely raise the feed
roll assembly (2 clicks).
2
Raise the feed roll assembly
cover.
3
Remove the feed roll assem-
bly.
NOTE: There are three rollers on the feed roll
cartridge.
If the lower feed roll does not come out with feed
roll assembly, then remove it separately from the
machine.
Figure 1 Feed roll assembly
Repairs/Adjustments
REP 5.14