Xerox ColorQube 9303 Series Service Manual page 172

Ejector motor encoder
sensor, Q12-096
Figure 1 Component location
Status Indicator RAPs
12-450-00-171, 12-456-00-171 to 12-459-00-171, 12-
Ejector motor,
MOT12-236
Ejector out sensor,
Ejector home sensor,
Q12-185
Q12-184
12-451-00-171 to 12-455-00-171 HVF Ejector Roll and
Lower Paddle Fault RAP
12-451-00-171 The ejector roll motor has stalled.
12-452-00-171 The ejector roll did not return to the home position.
12-453-00-171 The ejector roll did not move from the home position.
12-454-00-171 The lower paddle has failed to return to the home position.
12-455-00-171 The lower paddle has failed to move from the home position.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
• Check for any damage or obstructions that would prevent the ejector roll and lower paddle
from operating correctly.
Procedure
Figure 1, Figure 2 and Figure 3
Enter dC330 code, 12-242 to lower the bin 1 stacker tray. Enter
1 forward. This moves the ejector module to the out position. Enter
tor plate home sensor, Q12-098. Manually turn the ejector belts a few centimeters. The
play changes.
Y N
Go to WD 12.11. Check the wiring and repair as necessary,
Refer to:
• GP 11 How to Check a Sensor.
• 12A-171, HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Ejector assembly, PL 12.110 Item
• HVF PWB, PL 12.140 Item
Enter the dC330 code 12-097, ejector roll motor encoder sensor, Q12-097. Enter the code, 12-
233 to rotate the ejector roll motor one cycle of the ejector plates in the forward direction. The
display changes.
Y N
The ejector roll motor turned.
Y N
Go to WD 12.15. Check the wiring and repair as necessary,
MOT12-233. Refer to:
• GP 10 How to Check a Motor.
• 12A-171 HVF Power Distribution RAP.
• 01L 0V Distribution RAP
A B
February 2013
2-148
WARNING
GP 14. Disconnect the power cord. Electricity can cause
show the component locations.
dC330 code 12-249, staple unit
dC330
REP
2.
2.
ColorQube® 9303 Family
code 12-098, ejec-
dis-
1.1. Check Q12-098.
REP 1.1. Check