Xerox ColorQube 9303 Series Service Manual page 178

Tri-folder unit
HVF power
supply module
BM PWB
Figure 1 Component location
Status Indicator RAPs
12-463-00-171, 12-464-00-171, 12-465-00-171 to 12-
12-465-00-171 to 12-468-00-171 Paddle Unit Position RAP
12-465-00-171 The paddle unit has failed to return to the upper position.
12-466-00-171 The paddle unit has failed to move from the upper position.
12-467-00-171 The paddle unit has failed to return to the lower position.
12-468-00-171 The paddle unit has failed to move from the lower position.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Check for damage or obstructions that would prevent the paddle unit from operating correctly.
Procedure
NOTE: All HVF BM interlocks must be made to supply +24V to the motors.
Enter dC330, code 12-239 to run the paddle unit motor, MOT12-239,
runs.
Y N
Go to WD
Refer to:
• GP 10
• 12A-171, HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Paddle unit motor,
• HVF PWB,
The paddle unit moves.
Y N
Check the drive gears on the paddle unit. Install new components as necessary,
12.115 Item
Enter dC330, code 12-174 paddle unit upper sensor, Q12-174. Select code 12-240 to run the
paddle unit motor. The sensor status changes.
Y N
Go to WD
Refer to:
• GP 11
HVF PWB
• 12A-171, HVF Power Distribution RAP.
• 01L 0V Distribution RAP
Install new components as necessary:
• Paddle unit,
• HVF PWB,
Enter dC330, code 12-175 paddle unit lower sensor, Q12-175. Select code 12-239 to run the
paddle unit motor. The sensor status changes.
February 2013
2-154
WARNING
GP 14. Disconnect the power cord. Electricity can cause
12.10. Check the paddle unit motor, MOT12-239.
How to Check a Motor.
PL 12.120 Item 6.
PL 12.140 Item 2.
2.
12.9. Check Q12-174.
How to Check a Sensor.
PL 12.115 Item 2.
PL 12.140 Item 2.
Figure 1. The motor
PL
ColorQube® 9303 Family