Rep 10.9 Stripper Solenoid Assembly - Xerox ColorQube 9303 Series Service Manual

REP 10.9 Stripper Solenoid Assembly

Parts List on PL 10.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Use care when working near the drum. The drum can be damaged easily, which will cause
print quality defects.
1. Manually unlock the stripper gate and baffle assembly, refer to
2. Open the stripper gate, GP 31.
3. Remove the rear cover, PL 81.10 Item
4. Remove the drum drive motor and belt,
5. Remove stripper solenoid, Figure 1.
A
A
2
Disconnect the inline connector,
then remove the solenoid assembly.
Figure 1 Stripper solenoid removal
Repairs/Adjustments
REP 10.9
WARNING
GP 14. Disconnect the power cord
WARNING
CAUTION
GP 31.
1.
REP 91.24.
1
Remove 2 screws marked A.
Replacement
Replacement is the reverse of the removal procedure.
February 2013
4-72 ColorQube® 9303 Family