Table of Contents
Advertisement
99-564-00 to 99-565-00 PEST Error 23 RAP
99-564-00 Thermistor, melt reservoir open.
99-565-00 Thermistor, melt reservoir short.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Procedure
Refer to
Table
1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Table 1 PEST codes and action
Code
Hard/Soft
Action
99-564
Hard
Go to the
93-520-00, 93-521-00, 93-522-00
mal Error RAP. Check the DC cabling to the reservoir. If it is open or
short, install a new cable.
99-565
Hard
Go to the
93-520-00, 93-521-00, 93-522-00
mal Error RAP. Check the DC cabling to the reservoir. If it is open or
short, install a new cable.
Status Indicator RAPs
99-564-00 to 99-565-00, 99-600-00 to 99-605-00
WARNING
Ink Melt Reservoir Ther-
Ink Melt Reservoir Ther-
99-600-00 to 99-605-00 PEST Error 24 RAP
99-600-00 Purge solenoid valve head 1.
99-601-00 Solenoid, ink purge valve H2 open.
99-602-00 Solenoid, ink purge valve H3 open.
99-603-00 Solenoid, ink purge valve H4 open.
99-604-00 Solenoid, ink dose valve H1 yellow open.
99-605-00 Solenoid, ink dose valve H1 cyan open.
Initial Actions
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Procedure
Refer to
Table
1. Perform the relevant action. For an explanation of PEST codes refer to
dC123.
Code
Hard/Soft Action
99-600 Hard
Go to the
the reservoir. If it is open or short replace, install a new cable. If neces-
sary, install a new ink reservoir.
99-601 Hard
Go to the
the reservoir. If it is open or short replace, install a new cable. If neces-
sary, install a new ink reservoir.
99-602 Hard
Go to the
the reservoir. If it is open or short replace, install a new cable. If neces-
sary, install a new ink reservoir.
99-603 Hard
Go to the
the reservoir. If it is open or short replace, install a new cable. If neces-
sary, install a new ink reservoir.
99-604 Hard
Go to the
the reservoir. If it is open or short replace, install a new cable. If neces-
sary, install a new ink reservoir.
99-605 Hard
Go to the
the reservoir. If it is open or short replace, install a new cable. If neces-
sary, install a new ink reservoir.
February 2013
2-500
WARNING
GP
14. Disconnect the power cord. Electricity can cause
Table 1 PEST codes and action
93A
Ink Melt Reservoir Check RAP. Check the DC cabling to
93A
Ink Melt Reservoir Check RAP. Check the DC cabling to
93A
Ink Melt Reservoir Check RAP. Check the DC cabling to
93A
Ink Melt Reservoir Check RAP. Check the DC cabling to
93A
Ink Melt Reservoir Check RAP. Check the DC cabling to
93A
Ink Melt Reservoir Check RAP. Check the DC cabling to
ColorQube® 9303 Family
Advertisement
Chapters
Table of Contents
