Rcc Ahb2 Peripheral Clock Enable In Low Power Mode Register (Rcc_Ahb2Lpenr) - ST STM32F405 Reference Manual

Reset and clock control for STM32F42xxx and STM32F43xxx (RCC)
6.3.16 RCC AHB2 peripheral clock enable in low power mode register
(RCC_AHB2LPENR)
Address offset: 0x54
Reset value: 0x0000 00F1
Access: no wait state, word, half-word and byte access.
31 30 29
15 14 13
Bits 31:8 Reserved, must be kept at reset value.
Bit 7 OTGFSLPEN: USB OTG FS clock enable during Sleep mode
Bit 6 RNGLPEN: Random number generator clock enable during Sleep mode
Bit 5 HASHLPEN: Hash modules clock enable during Sleep mode
Bit 4 CRYPLPEN: Cryptography modules clock enable during Sleep mode
Bits 3:1 Reserved, must be kept at reset value.
Bit 0 DCMILPEN: Camera interface enable during Sleep mode
192/1749
28 27 26 25
12 11 10 9
Reserved
This bit is set and cleared by software.
0: USB OTG FS clock disabled during Sleep mode
1: USB OTG FS clock enabled during Sleep mode
This bit is set and cleared by software.
0: Random number generator clock disabled during Sleep mode
1: Random number generator clock enabled during Sleep mode
This bit is set and cleared by software.
0: Hash modules clock disabled during Sleep mode
1: Hash modules clock enabled during Sleep mode
This bit is set and cleared by software.
0: cryptography modules clock disabled during Sleep mode
1: cryptography modules clock enabled during Sleep mode
This bit is set and cleared by software.
0: Camera interface clock disabled during Sleep mode
1: Camera interface clock enabled during Sleep mode
24 23 22
Reserved
8 7 6
OTGFS RNG HASH
LPEN LPEN LPEN
rw rw
RM0090 Rev 18
21 20 19 18
5 4 3 2
CRYP
LPEN
Reserved
rw rw
RM0090
17 16
1 0
DCMI
LPEN
rw