Page 1
ST STM32F407 Evaluation Board V2.2 User Manual This document and all documents accompanying it are copyrighted by iSYSTEM AG and all rights are reserved. Duplication of these documents is allowed for personal use. In all other cases, written consent from iSYSTEM is required.
Page 2
Introduction ST STM32F407 Evaluation Board is a development system for STM32F407 microcontroller. The IT STM32F407 package features a target board populated with STM32F407 CPU in the LQFP176 package, 20-pin Cortex Debug + ETM Connector. The application under the development or test can run from the internal CPU flash or from the internal SRAM.
Page 3
Status Indicators • LD2 LED indicates the 3.3 V supply voltage presence. • LD1 LED is connected to PB9. Connectors • 20-pin Cortex Debug + ETM Connector • USB Placed on the target board for CPU communication purposes only, cannot to be used to power the target board.
Page 4
CPU expansion connection The target board exposes most of STM32F407 pins/signals, which allow easy expansion of the development system. U4 - ANALOG U5 - COMMUNICATION Connector Connector CPU pin CPU pin CPU pin CPU pin description description description description number...
Need help?
Do you have a question about the STM32F407 and is the answer not in the manual?
Questions and answers