Leadshine EL8-EC Series User Manual page 166

8. d11Ai Analog input
D11 Ai
3 analog inputs can be monitored through d11. Left most bar at the top: 1
nd
at the middle: 2 analog input; at the bottom 3
means negative value.
9. d12Er Alarm cause and historical record
D12 Er
Please refer to the alarm list table in chapter 8 for alarms that can be recorded.
10. d14rg Regenerative load factor d15oL Overload factor
Regenerative load factor（Er120 might occur, if the value increases indefinitely）
D1 4rg
Overload factor（Er100 might occur, if d increases indefinitely
Er101 might occur, if L increases indefinitely）
_ 2 0
S
▼
▲
- 2 0
▼
▲
_ 2 0
rd
Er 150
S
01 150
14 0E2
Press▲▼to check error historical
record up to 14 records.
5 0
S
User manual of EL8-EC***F AC Servo
Analog input 1（Unit: 0.001V）
Analog input 2（Unit: 0.001V）
Analog input 3（Unit: 0.001V）
analog input. Points on 4
......Current error
......Historical record 1
（Latest）
......Historical record 14
（Oldest）
Load factor in
regenerative resistance
circuit [%]
st
analog input;
th th
and 5 value
166