Leadshine EL8-EC Series User Manual page 102

Label
Range
Pr4.36
Activation
When motor velocity > Pr4.36, AT-speed output signal is valid.
Detection using 10RPM hysteresis.
Label
Range
Pr4.37
Activation
To set delay time for holding brake to be activated after motor power off to prevent axis from
sliding.
Label
Pr4.38
Range
Activation
To set delay time for holding brake to be released after motor power on. Motor will
remain at current position and input command is masked to allow holding brake to be
fully released before motor is set in motion.
Arrival velocity (AT-speed)
10~2000 Unit
RPM
Immediate
Motor power-off delay time
0~3000 Unit
Immediate
Delay time for holding brake
release
0~3000 Unit
Immediate
User manual of EL8-EC***F AC Servo
Mode
Default 1000
Mode
1ms Default 100
Mode
1ms Default 0
PV CSV
Index 2436h
Index 2437h
Index 2438h
102
F
F