Leadshine EL8-EC Series User Manual page 34


Mechanical noise might exist when motor with holding brake is in operation but it
doesn't affect the functionality of the motor.

When the holding brake circuit is closed (holding brake deactivated), there might be
magnetic flux leakage. Please be aware to not use magnetic sensor around motor
with holding brake.

24V operating voltage for the holding brake has to be ensured to maintain the
functionality of the holding brake. Please consider the voltage dropped over lengthy
motor cables due to increase in cable resistance.

It is recommended to have an isolated switching power supply for the holding brake to
prevent malfunctioning of the holding brake in case of voltage drop.
User manual of EL8-EC***F AC Servo
34