Motor Power Supply X2; Motor Power Cable Selection (Port X2) - Leadshine EL8-EC Series User Manual

2.6 Motor Power Supply X2

Pin Label
U terminal
U
V terminal
V
W W terminal
PE PE

2.6.1 Motor power cable selection (Port X2)

Example of motor power cable connection using an AMP electrical connector
Please connect the wires to corresponding terminals as labeled.
Motor winding power cable

Wire length available: 1.5m, 3m and 5m

Connectors type available: AMP electrical connectors, aviation connectors,

Please contact Leadshine sales team or any Leadshine certified local retailers for any
customized needs.
Explanation
To motor U terminal
To motor V terminal
To motor W terminal
Motor frame
direct connectors (recommended)
User manual of EL8-EC***F AC Servo
Remarks
① Please make sure U, V, W terminals
of driver and motor are correctly
connected.
② Connect motor PE to driver PE and
ground.
U
V
W
PE
29