Rotax 912 i Series Maintenance Manual page 79

Step
7 Adjust the pulley tension and tighten M10
and M8 hex. screws.
Tightening torque M10: 40 Nm (354 in.lb.)
Tightening torque M8: 22 Nm
(194.7 in.lb.)
See the most recent Line Maintenance
Manual for the respective engine type.
FINISHING WORK
- Install the propeller. See "Documentation of
aircraft manufacturer"
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
24-30-00
Page 9
July 01/2012