Rotax 912 i Series Maintenance Manual page 58

Fig. 7
1. Dowel pin
FLY WHEEL ASSY. REMOVAL
Preparation
- Fix the crankshaft into place. See relevant
Maintenance Manual Line for the 912 i Series
engine type.
Step
1 Loosen 6 M6x12 Allen screws.
2 Remove the fly wheel.
The location of the fly wheel does not
NOTE:
have to be marked on the freehub body.
Fig. 8
1. Fly wheel
Effectivity: 912 i Series
Edition 1/Rev. 1
BRP-Powertrain
MAINTENANCE MANUAL
2. Plug screws
Procedure
2. M6x12 Allen screw
STATOR ASSY. - REMOVAL
NOTICE
WARNUNG
Mark cables before removing the connector
receptacle.
The generator coils A and B have different sizes
and powers.
Step
1 Mark cables.
Fig. 9
1. Generator coil A mark (black connector)
2. Generator coil B mark (gray connector)
Step
2 Pull out the orange latch with a pair of
long-nose pliers.
Fig. 10
1. Connector
3. Long-nose pliers
Procedure
Procedure
2. Latch
24-20-00
Page 8
October 01/2013