Rotax 912 i Series Maintenance Manual page 242

DISASSEMBLY
FUEL PRESSURE REGULATOR ASSY. -
DISASSEMBLY
Step
1 Drain the fuel. See also section 12-20-00
Planned maintenance.
2 Remove the cable ties and pull out the
hose.
3 Disconnect the plug connection to the
temperature sensor.
Fig. 7
1. Cable ties
3. Temperature sensor
Step
4 Remove the retaining ring using Seeger
ring pliers.
5 Remove the fuel pressure regulator.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Hose
Procedure
Fig. 8
1. Retaining ring 2. Fuel pressure regulator
73-10-00
Page 10
July 01/2012