Rotax 912 i Series Maintenance Manual page 431

REMOVAL
REMOVAL OF THE OIL TANK
WARNUNG WARNING
Danger of severe burns and scalds! Always
allow the engine to cool down to ambient tem-
perature before starting any work.
WARNUNG WARNING
Danger of electric shock! Switch off the ignition
and pull out the ignition key! Disconnect the
negative terminal of the battery.
Preparation
- Switch the ignition key OFF
- Drain the oil
- Remove the oil tank according to the aircraft
manufacturer's specifications.
ENVIRONMENT NOTE
Dispose of used oil according to local environ-
mental regulations.
NOTICE
WARNUNG
Use appropriate protective coverings to prevent
the ingress of debris particles into all discon-
nected lines and connections.
The assemblies and lines are only to be
NOTE:
removed if necessary and only as far as
is necessary.
Step
1 Remove surrounding assemblies and
detach oil lines.
ENVIRONMENT NOTE
Ensure that no oil gets into the waste water sys-
tem or the ground – risk of contaminating drin-
king water!
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
Fig. 25
1. Oil tank
3. Oil dipstick
2. Cover
79-00-00
Page 19
July 01/2012