Rotax 912 i Series Maintenance Manual page 306

Step
8 Install the spring type hose clip 25 on pre-
formed hose 4.
NOTE: Align the spring type hose clip
25 so that it does not come into
contact with the other spring
type hose clips.
9 Push on preformed hose 4 and align it
horizontally like preformed hoses 3 and 1.
NOTE: Preformed hose 4 is symmetri-
cal.
Fig. 28
1. Spring type hose clip 25
3. Expansion tank
Step
10 Install the spring type hose clip 25 on pre-
formed hose 2 and position it vertically.
11 Push on preformed hose 2 and align it
horizontally.
NOTE: Preformed hose 2 is symmetri-
cal.
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
2. Preformed hose 4
Procedure
Fig. 29
1. Spring type hose clip 25
3. Expansion tank
2. Preformed hose 2
75-00-00
Page 18
July 01/2012