Rotax 912 i Series Maintenance Manual page 286

INSTALLATION
KNOCK SENSOR - INSTALLATION
See section 76-70-00 Sensors and actuators
and section 76-50-00 Wiring harness.
SPARK PLUG - INSTALLATION
NOTICE
WARNUNG
Risk of damage to spark plugs!
The spark plugs must only be installed with the
spark plug wrench!
Step
1 Lubricate M14x1.25 SW16 spark plugs
with SILIKON heat conduction compound
and install clockwise in the corresponding
cylinder head.
Tightening torque 20 Nm (176.96 in. lb.).
Effectivity: 912 i Series
Edition 1/Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Procedure
RESISTANCE SPARK PLUG CONNEC-
TOR AND IGNITION CABLE ASSY. -
INSTALLATION
NOTICE
WARNUNG
Risk of damage to resistance spark plug con-
nector!
The resistance spark plug connectors must only
be installed using the spark plug pliers.
If using an equivalent tool, ensure that it has no
pointed or sharp edges!
Step
1 Install the resistance spark plug connec-
tor on the ignition cable assy. and secure
it with a cable tie.
Fig. 14
1. Resistance spark plug
connector
3. 94x2.5 cable ties
Step
2 Route the ignition cable assy. correctly
and secure it with a cable tie.
Procedure
2. Ignition cable assy.
Procedure
74-20-00
Page 14
July 01/2012